80mm Heavy-Duty Self-Adhesive Aluminium Floor Strip 2.7m

Extra Wide 80mm Heavy-Duty Self-Adhesive Aluminium Floor Transition Strip

2.7m Cover Profile for Wide Same-Level Flooring Gaps and Interior Joints

Cover wider flooring gaps with our Extra Wide 80mm Heavy-Duty Self-Adhesive Aluminium Floor Transition Strip. Designed for floors at the same height, this broad profile creates a clean connection between laminate, wood, vinyl and tiled surfaces.

The generous 80mm width provides greater coverage than a standard door threshold strip, making it suitable for large expansion gaps, exposed flooring edges and replacement projects. It can also be used to cover suitable joints in interior walls, ceilings and decorative panels.

Manufactured from anodised aluminium, the profile is strong, corrosion-resistant and designed for busy residential and commercial interiors. Its integrated self-adhesive backing provides a clean installation without screws, drilling or visible fixings.

The strip measures 2.7 metres long and can be shortened to suit doorways, open-plan floor joins and larger interior projects.

Key Features

• Extra-wide 80mm aluminium transition profile
• Heavy-duty 4mm-thick construction
• 2700mm overall length
• Designed for floors at the same height
• Suitable for laminate, wood, vinyl and tile
• Covers wide expansion gaps and exposed edges
• Strong self-adhesive backing
• No screws, plugs or drilling required
• Anodised aluminium for improved wear resistance
• Maximum stated load rating of 55kg/cm²
• Temperature resistance from -40°C to +110°C
• Can be cut to the required length
• Suitable for residential and commercial interiors
• Can cover suitable wall, ceiling and panel joints

Product Specifications

Benefits of This Extra-Wide Transition Strip

Covers Large Flooring Gaps

The 80mm-wide profile provides generous coverage where a standard threshold strip may be too narrow.

Heavy-Duty Aluminium Construction

The 4mm-thick anodised aluminium profile is designed to withstand regular pressure, impact and foot traffic.

Fast No-Drill Installation

The self-adhesive backing allows the strip to be fitted without screws, plugs or drilling into the floor.

Protects Exposed Flooring Edges

The profile covers vulnerable laminate, wood, vinyl and tile edges, helping reduce lifting, chipping and everyday damage.

Multi-Purpose Interior Use

In addition to flooring joins, the strip can cover suitable gaps in walls, ceilings and interior panels.

Applications

This extra-wide aluminium transition strip is ideal for:

• Same-level flooring transitions
• Wide expansion gaps
• Laminate to laminate joins
• Wood to vinyl transitions
• Tile to laminate flooring joins
• Open-plan flooring connections
• Wide internal doorways
• Hallways and room entrances
• Homes and flats
• Offices, shops and commercial interiors
• Renovation and replacement projects
• Suitable interior wall and ceiling joints
• Decorative panel connections

Installation Guide

1. Measure the flooring gap or interior joint carefully.
2. Check that both adjoining floors are at the same height.
3. Cut the aluminium strip to the required length using a fine-tooth hacksaw.
4. Smooth the cut edge carefully with a suitable metal file.
5. Place the profile over the join to check its position and coverage.
6. Clean the fitting surface thoroughly to remove dust, grease and loose material.
7. Make sure the surface is smooth, stable and completely dry.
8. Peel away a small section of the protective adhesive backing.
9. Align the strip carefully before pressing it into position.
10. Remove the remaining backing gradually while applying firm pressure along the full length.
11. Check that the profile is evenly bonded without raised areas or gaps.
12. Avoid moving or placing heavy pressure on the strip immediately after installation.
13. For the best bond, apply the adhesive to a solid, smooth and suitable surface. Do not attach it directly to loose carpet fibres, damp flooring or unstable materials.

Why Choose DoorThreshold.co.uk?

DoorThreshold.co.uk supplies practical flooring profiles for homeowners, tradespeople and installers across the UK. Our clear specifications and fitting guidance make it easier to select the right threshold width, length and fixing method.

Order your Extra Wide 80mm Heavy-Duty Self-Adhesive Aluminium Floor Transition Strip today for secure coverage across larger flooring gaps.

Frequently Asked Questions

What do the 80mm and 4mm measurements mean?

The transition strip is 80mm wide and approximately 4mm thick.

What is the length of this aluminium strip?

The profile is 2700mm or 2.7 metres long.

Is it suitable for floors at different heights?

No. This profile is designed mainly for floors at the same height. A ramp or reducer threshold is more suitable for uneven floor levels.

Does this strip require screws or drilling?

No. It has an integrated self-adhesive backing and can be installed without screws, plugs or drilling.

Can the profile be used for wall or ceiling joints?

Yes. It can cover suitable joints in interior walls, ceilings and panels, provided the surface is clean, smooth, dry and compatible with adhesive fitting.